Motorcycle tire review and fitment for Yamaha FJR 1300 A / AS 2006-2008

Motorcycle tire review and specification for Yamaha FJR 1300 A / AS 2006-2008
#	Motorcycle tire review and specification	Tire tube type	We recommend	Image (click to enlarge)	Ad
1	Front Tire: 120/70ZR17 58W	Tubeless(TL)	Dunlop Sportmax Roadsmart Front Sport Touring / Trail
	Rear Tire: 180/55ZR17 73W	Tubeless(TL)	Dunlop Sportmax Roadsmart Sport Touring / Trail
2	Front Tire: 120/70ZR17 58W	Tubeless(TL)	Dunlop Sportmax Qualifier RR Hypersport
	Rear Tire: 180/55ZR17 73W	Tubeless(TL)	Dunlop Sportmax Qualifier RR Hypersport
3	Front Tire: 120/70ZR17 58W	Tubeless(TL)	Dunlop Sportmax Qualifier D209F Supersport
	Rear Tire: 180/55ZR17 73W	Tubeless(TL)	Dunlop Sportmax Qualifier D209 Supersport

Motorcycle tire review and tips especially for Yamaha FJR 1300 A / AS 2006-2008 tires

• When oil is changed, it’s a good idea to check tire pressure and inflate to at least recommended manufacturer suggested pressure or higher so the tires run cooler and have less rolling resistance. This will result in better fuel economy and higher mileage for your tires. It also helps avoid irregular tread wear on the tires.


• They are the only thing between you and the road surface. Proper care and inspection is critical for safe operation of the motorcycle. It is important to check not only the tire pressure routinely, but also the entire tire surface for cuts, nails and other items such as cracks, splits and bulges, before each ride. Tire pressure is important for various reasons including life of the tire in terms of mileage and ride quality. Please refer to your Owners Manual for the tire inflation pressures for your model of bike.


• Never inflate a tire beyond the maximum inflation as noted on the tire sidewall. Inflate your tires when they are cold, and be aware that a cooler day may also require you to recheck the inflation pressures due to a change in outside air temperature.


• When inspecting your tires check the tread wear indicators (TWI), which are noted by the TWI (some tires may display logos etc in place of TWI) marking located on the tire sidewall. Look towards the center of the tire to locate the actual tire wear bar which will be located in the tread groove itself, as a raised bar. When the tire is worn to this indicator it is time for a new tire. We have actual samples of worn tires to show you the amount of skin left between you and the road so to say. It is scary. The remaining amount of rubber is actually less than is apparent from the outside.


• Hydroplaning is the effect when the tire rides up onto the water surface of the road. What effects this is both the remaining thread depth, speed of the motorcycle and the amount of water on the road surface. In wet weather slow down and before going on a long ride for safety sake replace your tires if they are near the wear bars...its your skin.

>> OK, but what do these numbers and letters mean? <<
:: Help me identifying the motorbike tire codes! ::