Motorcycle tire reviews

Motorcycle tire review Triumph Trophy 900 to 1993

#	Motorcycle tire review and specification	Tire tube type	We recommend
Motorcycle tire review and specification for Triumph Trophy 900 to 1993
1	Front Tire: 120/70ZR17 58W	Tubeless(TL)	Dunlop Sportmax Roadsmart Front Sport Touring / Trail
1	Rear Tire: 160/60ZR18 70W	Tubeless(TL)	Dunlop Sportmax Roadsmart Sport Touring / Trail

Air It Out: Check tire pressure every chance you get. There's probably no simpler procedure that's more important and more ignored by bikers of every stripe. The air, not the carcass, supports the bike, and underinflation is a tire's number one enemy. (Make sure the tires are cool when you take the reading.) Contrary to most belief of riders that lesser pressure tire offer more grip on wet roads---For a better tractrion in wet conditions, increase pressures by about 10 percent. Unsure of what the pressure is supposed to be? Look for a sticker somewhre on the bike. It is also probably on the VIN (serial number) plate hear the steering head with the gross vehicle weight rating (GVWR) and gross axle weight ratings (GAWR) information. The simplest and most important thing you can do for your tires' health and your safety is keep them, inflated to the designated pressure.

Use a digital pressure gauge if possible or ensure your pencil stick gauge is accurate. Look into a tire sensor to warn of low air.

Hydroplaning is the effect when the tire rides up onto the water surface of the road. What effects this is both the remaining thread depth, speed of the motorcycle and the amount of water on the road surface. In wet weather slow down and before going on a long ride for safety sake replace your tires if they are near the wear bars...its your skin.

Unseen internal tire damage: If you have a front or rear wheel that has a dented rim, replace the tire, as the tire has suffered internal damage to the sidewall. This applies to car tires as well. It is wise to replace the wheel as well since it may be internally cracked. The straightening of bent wheel rims is not recommended since you are reworking the metal thus weakening it.

Do not apply any type of tire dressing to the sidewall or worse to the tread area of the tire, it is very slippery. Use only approved tires for your model of bike.