Motorcycle tire review and fitment for Triumph TR 6 Trophy 1958-1962

Motorcycle tire review and specification for Triumph TR 6 Trophy 1958-1962
#	Motorcycle tire review and specification	Tire tube type	We recommend	Image (click to enlarge)	Ad
1	Front Tire: 3.2-19 54P	Tubed Tire(TT)	Dunlop K70 Lightweight and Classic Bikes
	Rear Tire: 4.0-18 64S	Tubed Tire(TT)	Dunlop K70 Lightweight and Classic Bikes
2	Front Tire: 3.2-19 54H	Tubed Tire(TT)	Dunlop Arrowmax GT501F General Road Tires
	Rear Tire: 4.0-18 64H	Tubed Tire(TT)	Dunlop Arrowmax GT501 General Road Tires

Motorcycle tire review and tips especially for Triumph TR 6 Trophy 1958-1962 tires

• Top It Off: The valve stem cap should be securely fastened on the stem, because it's an important part of your tire's sealing system. It'll give you extra security at high speeds, when centrifugal force can conspire to open the valve inside the stem.


• When riding for long distances monitor tire pressure every morning when tires are cold. Then check tire pressure after a few hours of use. More than a 10% increase in inflation means the tire is working too hard. Lighten the load, decrease speed, or add air to the tires so they run cooler.


• When oil is changed, it’s a good idea to check tire pressure and inflate to at least recommended manufacturer suggested pressure or higher so the tires run cooler and have less rolling resistance. This will result in better fuel economy and higher mileage for your tires. It also helps avoid irregular tread wear on the tires.


• They are the only thing between you and the road surface. Proper care and inspection is critical for safe operation of the motorcycle. It is important to check not only the tire pressure routinely, but also the entire tire surface for cuts, nails and other items such as cracks, splits and bulges, before each ride. Tire pressure is important for various reasons including life of the tire in terms of mileage and ride quality. Please refer to your Owners Manual for the tire inflation pressures for your model of bike.


• Do not apply any type of tire dressing to the sidewall or worse to the tread area of the tire, it is very slippery. Use only approved tires for your model of bike.

>> OK, but what do these numbers and letters mean? <<
:: Help me identifying the motorbike tire codes! ::