Motorcycle tire review and fitment for Triumph Speed Four 2003-2005

Motorcycle tire review and specification for Triumph Speed Four 2003-2005
#	Motorcycle tire review and specification	Tire tube type	We recommend	Image (click to enlarge)	Ad
1	Front Tire: 120/70ZR17 58W	Tubeless(TL)	Dunlop Sportmax Roadsmart Front Sport Touring / Trail
	Rear Tire: 180/55ZR17 73W	Tubeless(TL)	Dunlop Sportmax Roadsmart Sport Touring / Trail
2	Front Tire: 120/70ZR17 58W	Tubeless(TL)	Dunlop Sportmax Qualifier RR Hypersport
	Rear Tire: 180/55ZR17 73W	Tubeless(TL)	Dunlop Sportmax Qualifier RR Hypersport
3	Front Tire: 120/70ZR17 58W	Tubeless(TL)	Dunlop Sportmax D207F e Supersport / Sport Touring
	Rear Tire: 180/55ZR17 73W	Tubeless(TL)	Dunlop Sportmax D207 e Supersport / Sport Touring
4	Front Tire: 120/70ZR17 58W	Tubeless(TL)	Dunlop Sportmax Qualifier D209F Supersport		YOUR AD HERE? Contact us today for motorcycle tire related Advertising!
	Rear Tire: 180/55ZR17 73W	Tubeless(TL)	Dunlop Sportmax Qualifier D209 Supersport

Motorcycle tire review and tips especially for Triumph Speed Four 2003-2005 tires

• Steady, Now: Although it primarily affects handling, improper balance can also shorten a tire's life. Check it after 500 or 1000 miles of use.


• Don't Scrimp: If you replace your tires, make sure you replace the tubes, too. Some manufacturers even recommend that you change both tires at the same time, even if they wear differently.


• Check tire pressure at least once a month for cars, once a week for motorcycles. Tires can lose up to a pound a month of air pressure. Consistency is the key. A sudden drop in pressure is noticeable with regular pressure checks. E.g., 40, 39, 40 then 30 psi indicates a leak or puncture or other type of problem. It could be as simple as a bad valve stem or bent rim or something more serious such as internal tire failure.


• Remember cold weather means air in the tires contracts and may require additional air. High temperatures, hot or rough road surfaces, high speeds and heavy loads all cause the tire to work harder and hotter. Make sure tire pressure is sufficient to deal with these conditions. Also under inflation is the number one cause of tire failure.


• Tubes should always be replaced as these will wear just like the tire itself. When installing tubes be sure to locate the valve stem retaining nut all the way to the top of the valve stem so that it touches the cap. This way if the tube spins inside the tire you can see this by the tilt of the stem before the stem is torn from the tube itself. On tubeless tires always inspect the valve stem for cracks and dried out rubber, since these can crack over time and leak air. This thinking applies to car valve stems as well.

>> OK, but what do these numbers and letters mean? <<
:: Help me identifying the motorbike tire codes! ::