Motorcycle tire review Suzuki GS 1000 GL

Motorcycle tire review and fitment for Suzuki GS 1000 GL




Motorcycle tire review and specification for Suzuki GS 1000 GL
#Motorcycle tire review and specification Tire tube type We recommend Image
(click to enlarge)
Ad
1 Front Tire:
100/90-19 57V
Tubeless(TL) Dunlop Arrowmax GT501F
General Road Tires
Suzuki GS 1000 GL tire
Rear Tire:
130/90-16 67V
Tubeless(TL) Dunlop Arrowmax GT501
General Road Tires
Suzuki GS 1000 GL tire

Motorcycle tire review and tips especially for Suzuki GS 1000 GL tires
  • Air It Out: Check tire pressure every chance you get. There's probably no simpler procedure that's more important and more ignored by bikers of every stripe. The air, not the carcass, supports the bike, and underinflation is a tire's number one enemy. (Make sure the tires are cool when you take the reading.) Contrary to most belief of riders that lesser pressure tire offer more grip on wet roads---For a better tractrion in wet conditions, increase pressures by about 10 percent. Unsure of what the pressure is supposed to be? Look for a sticker somewhre on the bike. It is also probably on the VIN (serial number) plate hear the steering head with the gross vehicle weight rating (GVWR) and gross axle weight ratings (GAWR) information. The simplest and most important thing you can do for your tires' health and your safety is keep them, inflated to the designated pressure.

  • Don't Mix and Match: Never run two tires of differing construction. We can't stress this enough, and this rule applies to bias-plies vs. radials as well as tubeless and tube-type tires--even bias-ply vs. bias-belted tires. The results can be disastrous.

  • When riding for long distances monitor tire pressure every morning when tires are cold. Then check tire pressure after a few hours of use. More than a 10% increase in inflation means the tire is working too hard. Lighten the load, decrease speed, or add air to the tires so they run cooler.

  • When oil is changed, it’s a good idea to check tire pressure and inflate to at least recommended manufacturer suggested pressure or higher so the tires run cooler and have less rolling resistance. This will result in better fuel economy and higher mileage for your tires. It also helps avoid irregular tread wear on the tires.

  • Never inflate a tire beyond the maximum inflation as noted on the tire sidewall. Inflate your tires when they are cold, and be aware that a cooler day may also require you to recheck the inflation pressures due to a change in outside air temperature.

>> OK, but what do these numbers and letters mean? <<
:: Help me identifying the motorbike tire codes! ::


Looking for cheap Suzuki GS 1000 GL tires??? Try this link !
 

Add comment


Security code
Refresh