Motorcycle tire review and fitment for Suzuki Bandit 250 / 250 V / 250 VZ 1995 on

Motorcycle tire review and specification for Suzuki Bandit 250 / 250 V / 250 VZ 1995 on
#	Motorcycle tire review and specification	Tire tube type	We recommend	Image (click to enlarge)	Ad
1	Front Tire: 110/70R17 54H	Tubeless(TL)	Dunlop Sportmax GPR Alpha-10F Hypersport / Supersport
	Rear Tire: 150/60R17 66H	Tubeless(TL)	Dunlop Sportmax GPR Alpha-10 Hypersport / Supersport
2	Front Tire: 110/70ZR17 54W	Tubeless(TL)	Dunlop Sportmax D207F e Supersport / Sport Touring
	Rear Tire: 150/60ZR17 66W	Tubeless(TL)	Dunlop Sportmax D207 e Supersport / Sport Touring
3	Front Tire: 110/70ZR17 54W	Tubeless(TL)	Dunlop Sportmax Qualifier D209F Supersport
	Rear Tire: 150/60ZR17 66W	Tubeless(TL)	Dunlop Sportmax Qualifier D209 Supersport

Motorcycle tire review and tips especially for Suzuki Bandit 250 / 250 V / 250 VZ 1995 on tires

• Stay Smooth: This is common sense--avoid potholes and sharp objects on the road that can compromise your tire's integrity. The same goes for curbs.


• Check tire pressure at least once a month for cars, once a week for motorcycles. Tires can lose up to a pound a month of air pressure. Consistency is the key. A sudden drop in pressure is noticeable with regular pressure checks. E.g., 40, 39, 40 then 30 psi indicates a leak or puncture or other type of problem. It could be as simple as a bad valve stem or bent rim or something more serious such as internal tire failure.


• When oil is changed, it’s a good idea to check tire pressure and inflate to at least recommended manufacturer suggested pressure or higher so the tires run cooler and have less rolling resistance. This will result in better fuel economy and higher mileage for your tires. It also helps avoid irregular tread wear on the tires.


• Use a digital pressure gauge if possible or ensure your pencil stick gauge is accurate. Look into a tire sensor to warn of low air.


• Tubes should always be replaced as these will wear just like the tire itself. When installing tubes be sure to locate the valve stem retaining nut all the way to the top of the valve stem so that it touches the cap. This way if the tube spins inside the tire you can see this by the tilt of the stem before the stem is torn from the tube itself. On tubeless tires always inspect the valve stem for cracks and dried out rubber, since these can crack over time and leak air. This thinking applies to car valve stems as well.

>> OK, but what do these numbers and letters mean? <<
:: Help me identifying the motorbike tire codes! ::