Motorcycle tire review and fitment for Suzuki AN 250 Burgman 1999-2001

Motorcycle tire review and specification for Suzuki AN 250 Burgman 1999-2001
#	Motorcycle tire review and specification	Tire tube type	We recommend	Image (click to enlarge)	Ad
1	Front Tire: 110/90-13 56P	Tubeless(TL)	Dunlop Run Scoot 207F RS Scooter Bias-Ply
	Rear Tire: 130/70-13 63P	Tubeless(TL)	Dunlop Run Scoot 207 RS Scooter Bias-Ply

Motorcycle tire review and tips especially for Suzuki AN 250 Burgman 1999-2001 tires

• Air It Out: Check tire pressure every chance you get. There's probably no simpler procedure that's more important and more ignored by bikers of every stripe. The air, not the carcass, supports the bike, and underinflation is a tire's number one enemy. (Make sure the tires are cool when you take the reading.) Contrary to most belief of riders that lesser pressure tire offer more grip on wet roads---For a better tractrion in wet conditions, increase pressures by about 10 percent. Unsure of what the pressure is supposed to be? Look for a sticker somewhre on the bike. It is also probably on the VIN (serial number) plate hear the steering head with the gross vehicle weight rating (GVWR) and gross axle weight ratings (GAWR) information. The simplest and most important thing you can do for your tires' health and your safety is keep them, inflated to the designated pressure.


• They are the only thing between you and the road surface. Proper care and inspection is critical for safe operation of the motorcycle. It is important to check not only the tire pressure routinely, but also the entire tire surface for cuts, nails and other items such as cracks, splits and bulges, before each ride. Tire pressure is important for various reasons including life of the tire in terms of mileage and ride quality. Please refer to your Owners Manual for the tire inflation pressures for your model of bike.


• Never inflate a tire beyond the maximum inflation as noted on the tire sidewall. Inflate your tires when they are cold, and be aware that a cooler day may also require you to recheck the inflation pressures due to a change in outside air temperature.


• Hydroplaning is the effect when the tire rides up onto the water surface of the road. What effects this is both the remaining thread depth, speed of the motorcycle and the amount of water on the road surface. In wet weather slow down and before going on a long ride for safety sake replace your tires if they are near the wear bars...its your skin.


• Motorcycle tires work in much more brutal environment then car tires. Because of many factors such as load carried, horsepower and torque produced, and this being applied to a contact surface that is very small by comparison, one can understand why the tires are not only expensive but also work in a much more demanding environment. Therefore keeping the tire pressure correct and routine tire inspection is critical.

>> OK, but what do these numbers and letters mean? <<
:: Help me identifying the motorbike tire codes! ::