Motorcycle tire review and fitment for Moto Guzzi 1000 Le Mans II / III 1988 on
Motorcycle tire review and tips especially for Moto Guzzi 1000 Le Mans II / III 1988 on tires
- Soap It Up: Most tire manufacturers recommend that the only substance used to keep rubber shiny should be good old soap and water. Many alleged protectants actually promote premature cracking and finish deterioration. Make sure you wipe off any lube, brake fluid or gas promptly, too.
- Never inflate a tire beyond the maximum inflation as noted on the tire sidewall. Inflate your tires when they are cold, and be aware that a cooler day may also require you to recheck the inflation pressures due to a change in outside air temperature.
- Tubes should always be replaced as these will wear just like the tire itself. When installing tubes be sure to locate the valve stem retaining nut all the way to the top of the valve stem so that it touches the cap. This way if the tube spins inside the tire you can see this by the tilt of the stem before the stem is torn from the tube itself. On tubeless tires always inspect the valve stem for cracks and dried out rubber, since these can crack over time and leak air. This thinking applies to car valve stems as well.
- Unseen internal tire damage: If you have a front or rear wheel that has a dented rim, replace the tire, as the tire has suffered internal damage to the sidewall. This applies to car tires as well. It is wise to replace the wheel as well since it may be internally cracked. The straightening of bent wheel rims is not recommended since you are reworking the metal thus weakening it.
- Do not apply any type of tire dressing to the sidewall or worse to the tread area of the tire, it is very slippery. Use only approved tires for your model of bike.
>> OK, but what do these numbers and letters mean? <<
:: Help me identifying the motorbike tire codes! ::
:: Help me identifying the motorbike tire codes! ::
| < Prev | Next > |
|---|