Motorcycle tire review and fitment for Honda CBR 1000 F H J 1987-1988

Motorcycle tire review and specification for Honda CBR 1000 F H J 1987-1988
#	Motorcycle tire review and specification	Tire tube type	We recommend	Image (click to enlarge)	Ad
1	Front Tire: 110/80-17 57V	Tubeless(TL)	Dunlop Arrowmax GT501F General Road Tires
	Rear Tire: 140/80-17 69V	Tubeless(TL)	Dunlop Arrowmax GT501 General Road Tires

Motorcycle tire review and tips especially for Honda CBR 1000 F H J 1987-1988 tires

• Air It Out: Check tire pressure every chance you get. There's probably no simpler procedure that's more important and more ignored by bikers of every stripe. The air, not the carcass, supports the bike, and underinflation is a tire's number one enemy. (Make sure the tires are cool when you take the reading.) Contrary to most belief of riders that lesser pressure tire offer more grip on wet roads---For a better tractrion in wet conditions, increase pressures by about 10 percent. Unsure of what the pressure is supposed to be? Look for a sticker somewhre on the bike. It is also probably on the VIN (serial number) plate hear the steering head with the gross vehicle weight rating (GVWR) and gross axle weight ratings (GAWR) information. The simplest and most important thing you can do for your tires' health and your safety is keep them, inflated to the designated pressure.


• Top It Off: The valve stem cap should be securely fastened on the stem, because it's an important part of your tire's sealing system. It'll give you extra security at high speeds, when centrifugal force can conspire to open the valve inside the stem.


• Check tire pressure at least once a month for cars, once a week for motorcycles. Tires can lose up to a pound a month of air pressure. Consistency is the key. A sudden drop in pressure is noticeable with regular pressure checks. E.g., 40, 39, 40 then 30 psi indicates a leak or puncture or other type of problem. It could be as simple as a bad valve stem or bent rim or something more serious such as internal tire failure.


• When riding for long distances monitor tire pressure every morning when tires are cold. Then check tire pressure after a few hours of use. More than a 10% increase in inflation means the tire is working too hard. Lighten the load, decrease speed, or add air to the tires so they run cooler.


• Motorcycle tires work in much more brutal environment then car tires. Because of many factors such as load carried, horsepower and torque produced, and this being applied to a contact surface that is very small by comparison, one can understand why the tires are not only expensive but also work in a much more demanding environment. Therefore keeping the tire pressure correct and routine tire inspection is critical.

>> OK, but what do these numbers and letters mean? <<
:: Help me identifying the motorbike tire codes! ::