Motorcycle tire reviews

Motorcycle tire review Honda CB 750 C 1980-1982

#	Motorcycle tire review and specification	Tire tube type	We recommend
Motorcycle tire review and specification for Honda CB 750 C 1980-1982
1	Front Tire: 100/90-19 57V	Tubeless(TL)	Dunlop Arrowmax GT501F General Road Tires
1	Rear Tire: 130/90-16 67V	Tubeless(TL)	Dunlop Arrowmax GT501 General Road Tires

Top It Off: The valve stem cap should be securely fastened on the stem, because it's an important part of your tire's sealing system. It'll give you extra security at high speeds, when centrifugal force can conspire to open the valve inside the stem.

Check tire pressure at least once a month for cars, once a week for motorcycles. Tires can lose up to a pound a month of air pressure. Consistency is the key. A sudden drop in pressure is noticeable with regular pressure checks. E.g., 40, 39, 40 then 30 psi indicates a leak or puncture or other type of problem. It could be as simple as a bad valve stem or bent rim or something more serious such as internal tire failure.

When oil is changed, it’s a good idea to check tire pressure and inflate to at least recommended manufacturer suggested pressure or higher so the tires run cooler and have less rolling resistance. This will result in better fuel economy and higher mileage for your tires. It also helps avoid irregular tread wear on the tires.

They are the only thing between you and the road surface. Proper care and inspection is critical for safe operation of the motorcycle. It is important to check not only the tire pressure routinely, but also the entire tire surface for cuts, nails and other items such as cracks, splits and bulges, before each ride. Tire pressure is important for various reasons including life of the tire in terms of mileage and ride quality. Please refer to your Owners Manual for the tire inflation pressures for your model of bike.

Tubes should always be replaced as these will wear just like the tire itself. When installing tubes be sure to locate the valve stem retaining nut all the way to the top of the valve stem so that it touches the cap. This way if the tube spins inside the tire you can see this by the tilt of the stem before the stem is torn from the tube itself. On tubeless tires always inspect the valve stem for cracks and dried out rubber, since these can crack over time and leak air. This thinking applies to car valve stems as well.