Motorcycle tire review and fitment for Ducati Monster S4 RS Testastretta 2006-2008

Motorcycle tire review and specification for Ducati Monster S4 RS Testastretta 2006-2008
#	Motorcycle tire review and specification	Tire tube type	We recommend	Image (click to enlarge)	Ad
1	Front Tire: 120/70ZR17 58W	Tubeless(TL)	Dunlop Sportmax Roadsmart Front Sport Touring / Trail
	Rear Tire: 180/55ZR17 73W	Tubeless(TL)	Dunlop Sportmax Roadsmart Sport Touring / Trail
2	Front Tire: 120/70ZR17 58W	Tubeless(TL)	Dunlop Sportmax Qualifier RR Hypersport
	Rear Tire: 180/55ZR17 73W	Tubeless(TL)	Dunlop Sportmax Qualifier RR Hypersport
3	Front Tire: 120/70ZR17 58W	Tubeless(TL)	Dunlop Sportmax GP Racer D209 Soft Racing and Track Day
	Rear Tire: 180/55ZR17 73W	Tubeless(TL)	Dunlop Sportmax GP Racer D209 Medium Racing and Track Day
4	Front Tire: 120/70ZR17 58W	Tubeless(TL)	Dunlop Sportmax GP Racer D209 Medium Racing and Track Day		YOUR AD HERE? Contact us today for motorcycle tire related Advertising!
	Rear Tire: 180/55ZR17 73W	Tubeless(TL)	Dunlop Sportmax GP Racer D209 Endurance Racing and Track Day
5	Front Tire: 120/70ZR17 58W	Tubeless(TL)	Dunlop Sportmax D207F e Supersport / Sport Touring		YOUR AD HERE? Contact us today for motorcycle tire related Advertising!
	Rear Tire: 180/55ZR17 73W	Tubeless(TL)	Dunlop Sportmax D207 e Supersport / Sport Touring
6	Front Tire: 120/70ZR17 58W	Tubeless(TL)	Dunlop Sportmax Qualifier D209F Supersport		YOUR AD HERE? Contact us today for motorcycle tire related Advertising!
	Rear Tire: 180/55ZR17 73W	Tubeless(TL)	Dunlop Sportmax Qualifier D209 Supersport

Motorcycle tire review and tips especially for Ducati Monster S4 RS Testastretta 2006-2008 tires

• Air It Out: Check tire pressure every chance you get. There's probably no simpler procedure that's more important and more ignored by bikers of every stripe. The air, not the carcass, supports the bike, and underinflation is a tire's number one enemy. (Make sure the tires are cool when you take the reading.) Contrary to most belief of riders that lesser pressure tire offer more grip on wet roads---For a better tractrion in wet conditions, increase pressures by about 10 percent. Unsure of what the pressure is supposed to be? Look for a sticker somewhre on the bike. It is also probably on the VIN (serial number) plate hear the steering head with the gross vehicle weight rating (GVWR) and gross axle weight ratings (GAWR) information. The simplest and most important thing you can do for your tires' health and your safety is keep them, inflated to the designated pressure.


• Scuff 'Em Up: Optimal grip is obtained only after the tread surface has been ridden on, so go into those first few twisties with a bit of caution. The suggested break-in distance is usually 100 or so miles. After that, check the tire's pressure again!


• They are the only thing between you and the road surface. Proper care and inspection is critical for safe operation of the motorcycle. It is important to check not only the tire pressure routinely, but also the entire tire surface for cuts, nails and other items such as cracks, splits and bulges, before each ride. Tire pressure is important for various reasons including life of the tire in terms of mileage and ride quality. Please refer to your Owners Manual for the tire inflation pressures for your model of bike.


• When inspecting your tires check the tread wear indicators (TWI), which are noted by the TWI (some tires may display logos etc in place of TWI) marking located on the tire sidewall. Look towards the center of the tire to locate the actual tire wear bar which will be located in the tread groove itself, as a raised bar. When the tire is worn to this indicator it is time for a new tire. We have actual samples of worn tires to show you the amount of skin left between you and the road so to say. It is scary. The remaining amount of rubber is actually less than is apparent from the outside.


• Tubes should always be replaced as these will wear just like the tire itself. When installing tubes be sure to locate the valve stem retaining nut all the way to the top of the valve stem so that it touches the cap. This way if the tube spins inside the tire you can see this by the tilt of the stem before the stem is torn from the tube itself. On tubeless tires always inspect the valve stem for cracks and dried out rubber, since these can crack over time and leak air. This thinking applies to car valve stems as well.

>> OK, but what do these numbers and letters mean? <<
:: Help me identifying the motorbike tire codes! ::