Motorcycle tire review and fitment for Ducati 600 TL Pantah 1982

Motorcycle tire review and specification for Ducati 600 TL Pantah 1982
#	Motorcycle tire review and specification	Tire tube type	We recommend	Image (click to enlarge)	Ad
1	Front Tire: 100/90-18 56V	Tubeless(TL)	Dunlop Arrowmax GT501F General Road Tires
	Rear Tire: 110/90-18 61H	Tubeless(TL)	Dunlop Arrowmax GT501 General Road Tires

Motorcycle tire review and tips especially for Ducati 600 TL Pantah 1982 tires

• Air It Out: Check tire pressure every chance you get. There's probably no simpler procedure that's more important and more ignored by bikers of every stripe. The air, not the carcass, supports the bike, and underinflation is a tire's number one enemy. (Make sure the tires are cool when you take the reading.) Contrary to most belief of riders that lesser pressure tire offer more grip on wet roads---For a better tractrion in wet conditions, increase pressures by about 10 percent. Unsure of what the pressure is supposed to be? Look for a sticker somewhre on the bike. It is also probably on the VIN (serial number) plate hear the steering head with the gross vehicle weight rating (GVWR) and gross axle weight ratings (GAWR) information. The simplest and most important thing you can do for your tires' health and your safety is keep them, inflated to the designated pressure.


• Look Before You Crank: Before you saddle up, take a moment to visually inspect your tires. We can't tell you how many times we've pulled out screws or nails before a ride, thus preventing almost certain tire failure. Once you're on the road, it'll be too late.


• It is good idea to attend one of our tech sessions to learn how to plug the tires with a plug kit if that nasty nail has found its way into the tire carcass. That way if it does occur this temporary repair can be quickly accomplished on the roadside.


• Tubes should always be replaced as these will wear just like the tire itself. When installing tubes be sure to locate the valve stem retaining nut all the way to the top of the valve stem so that it touches the cap. This way if the tube spins inside the tire you can see this by the tilt of the stem before the stem is torn from the tube itself. On tubeless tires always inspect the valve stem for cracks and dried out rubber, since these can crack over time and leak air. This thinking applies to car valve stems as well.


• Unseen internal tire damage: If you have a front or rear wheel that has a dented rim, replace the tire, as the tire has suffered internal damage to the sidewall. This applies to car tires as well. It is wise to replace the wheel as well since it may be internally cracked. The straightening of bent wheel rims is not recommended since you are reworking the metal thus weakening it.

>> OK, but what do these numbers and letters mean? <<
:: Help me identifying the motorbike tire codes! ::