Motorcycle tire review and fitment for BMW R 100 GS (all models) 1986-1996

Motorcycle tire review and specification for BMW R 100 GS (all models) 1986-1996
#	Motorcycle tire review and specification	Tire tube type	We recommend	Image (click to enlarge)	Ad
1	Front Tire: 90/90-21 54H	Tubeless(TL)	Dunlop Trailmax D607F Trail
	Rear Tire: 130/80R17 65H	Tubeless(TL)	Dunlop Trailmax D607 Trail

Motorcycle tire review and tips especially for BMW R 100 GS (all models) 1986-1996 tires

• Air It Out: Check tire pressure every chance you get. There's probably no simpler procedure that's more important and more ignored by bikers of every stripe. The air, not the carcass, supports the bike, and underinflation is a tire's number one enemy. (Make sure the tires are cool when you take the reading.) Contrary to most belief of riders that lesser pressure tire offer more grip on wet roads---For a better tractrion in wet conditions, increase pressures by about 10 percent. Unsure of what the pressure is supposed to be? Look for a sticker somewhre on the bike. It is also probably on the VIN (serial number) plate hear the steering head with the gross vehicle weight rating (GVWR) and gross axle weight ratings (GAWR) information. The simplest and most important thing you can do for your tires' health and your safety is keep them, inflated to the designated pressure.


• Scuff 'Em Up: Optimal grip is obtained only after the tread surface has been ridden on, so go into those first few twisties with a bit of caution. The suggested break-in distance is usually 100 or so miles. After that, check the tire's pressure again!


• Use a digital pressure gauge if possible or ensure your pencil stick gauge is accurate. Look into a tire sensor to warn of low air.


• Eyeballing tires for under inflation or over inflation is not a good idea, particularly on a motorcycle. A bike on a center stand and with no riders on it could be missing half the weight or more the tires will end up supporting. In addition, it is necessary to get down and examine tires under the fender to see if there is any tire damage. With only a few small inches supporting the load on two tires versus a much larger contact patch on 4 tires it’s a much riskier proposition taking a chance with motorcycle tires. Check also for cracking on the sidewalls, in the grooves, stones or cuts.


• They are the only thing between you and the road surface. Proper care and inspection is critical for safe operation of the motorcycle. It is important to check not only the tire pressure routinely, but also the entire tire surface for cuts, nails and other items such as cracks, splits and bulges, before each ride. Tire pressure is important for various reasons including life of the tire in terms of mileage and ride quality. Please refer to your Owners Manual for the tire inflation pressures for your model of bike.

>> OK, but what do these numbers and letters mean? <<
:: Help me identifying the motorbike tire codes! ::