Motorcycle tire reviews

Motorcycle tire review BMW R 100 CS 1980-1984

#	Motorcycle tire review and specification	Tire tube type	We recommend
Motorcycle tire review and specification for BMW R 100 CS 1980-1984
1	Front Tire: 3.2-19 54H	Tubed Tire(TT)	Dunlop Arrowmax GT501F General Road Tires
1	Rear Tire: 4.0-18 64H	Tubed Tire(TT)	Dunlop Arrowmax GT501 General Road Tires

Air It Out: Check tire pressure every chance you get. There's probably no simpler procedure that's more important and more ignored by bikers of every stripe. The air, not the carcass, supports the bike, and underinflation is a tire's number one enemy. (Make sure the tires are cool when you take the reading.) Contrary to most belief of riders that lesser pressure tire offer more grip on wet roads---For a better tractrion in wet conditions, increase pressures by about 10 percent. Unsure of what the pressure is supposed to be? Look for a sticker somewhre on the bike. It is also probably on the VIN (serial number) plate hear the steering head with the gross vehicle weight rating (GVWR) and gross axle weight ratings (GAWR) information. The simplest and most important thing you can do for your tires' health and your safety is keep them, inflated to the designated pressure.

Top It Off: The valve stem cap should be securely fastened on the stem, because it's an important part of your tire's sealing system. It'll give you extra security at high speeds, when centrifugal force can conspire to open the valve inside the stem.

Soap It Up: Most tire manufacturers recommend that the only substance used to keep rubber shiny should be good old soap and water. Many alleged protectants actually promote premature cracking and finish deterioration. Make sure you wipe off any lube, brake fluid or gas promptly, too.

Check tire pressure at least once a month for cars, once a week for motorcycles. Tires can lose up to a pound a month of air pressure. Consistency is the key. A sudden drop in pressure is noticeable with regular pressure checks. E.g., 40, 39, 40 then 30 psi indicates a leak or puncture or other type of problem. It could be as simple as a bad valve stem or bent rim or something more serious such as internal tire failure.

They are the only thing between you and the road surface. Proper care and inspection is critical for safe operation of the motorcycle. It is important to check not only the tire pressure routinely, but also the entire tire surface for cuts, nails and other items such as cracks, splits and bulges, before each ride. Tire pressure is important for various reasons including life of the tire in terms of mileage and ride quality. Please refer to your Owners Manual for the tire inflation pressures for your model of bike.