Motorcycle tire review BMW K 75 S 1985-1995

Motorcycle tire review and fitment for BMW K 75 S 1985-1995




Motorcycle tire review and specification for BMW K 75 S 1985-1995
#Motorcycle tire review and specification Tire tube type We recommend Image
(click to enlarge)
Ad
1 Front Tire:
100/90-18 56V
Tubeless(TL) Dunlop Arrowmax GT501F
General Road Tires
BMW K 75 S 1985-1995 tire
Rear Tire:
130/90-17 68V
Tubeless(TL) Dunlop Arrowmax GT501
General Road Tires
BMW K 75 S 1985-1995 tire

Motorcycle tire review and tips especially for BMW K 75 S 1985-1995 tires
  • Don't Scrimp: If you replace your tires, make sure you replace the tubes, too. Some manufacturers even recommend that you change both tires at the same time, even if they wear differently.

  • Check tire pressure at least once a month for cars, once a week for motorcycles. Tires can lose up to a pound a month of air pressure. Consistency is the key. A sudden drop in pressure is noticeable with regular pressure checks. E.g., 40, 39, 40 then 30 psi indicates a leak or puncture or other type of problem. It could be as simple as a bad valve stem or bent rim or something more serious such as internal tire failure.

  • When riding for long distances monitor tire pressure every morning when tires are cold. Then check tire pressure after a few hours of use. More than a 10% increase in inflation means the tire is working too hard. Lighten the load, decrease speed, or add air to the tires so they run cooler.

  • They are the only thing between you and the road surface. Proper care and inspection is critical for safe operation of the motorcycle. It is important to check not only the tire pressure routinely, but also the entire tire surface for cuts, nails and other items such as cracks, splits and bulges, before each ride. Tire pressure is important for various reasons including life of the tire in terms of mileage and ride quality. Please refer to your Owners Manual for the tire inflation pressures for your model of bike.

  • Tubes should always be replaced as these will wear just like the tire itself. When installing tubes be sure to locate the valve stem retaining nut all the way to the top of the valve stem so that it touches the cap. This way if the tube spins inside the tire you can see this by the tilt of the stem before the stem is torn from the tube itself. On tubeless tires always inspect the valve stem for cracks and dried out rubber, since these can crack over time and leak air. This thinking applies to car valve stems as well.

>> OK, but what do these numbers and letters mean? <<
:: Help me identifying the motorbike tire codes! ::


Looking for cheap BMW K 75 S 1985-1995 tires??? Try this link !
Tags:
 

Add comment


Security code
Refresh